Holux M-1000 Pda/phone/notebook Bluetooth Gps Receiver

Wholesale Price:     £39.19

The HOLUX M-1000 Wireless Bluetooth GPS Receiver is a total solution GPS receiver with Bluetooth, UART interface and built-in rechargeable battery for high sensitivity to tracking signal. M-1000 design is based on Media Tek Inc.(MTK) GPS solution - MT3318 low power Architecture.
With the advanced technology, the M-1000 tracks up to 32 satellites at a time, re-acquires satellite signals in 100 ns and updates position data every second. Trickle-Power allows the unit operates a fraction of the time and Push-to-Fix permits user to have a quick position fix even though the receiver usually stays off

　Features

‧ Built in MTK MT3318 Low power consumption GPS chipset.
‧ 32 parallel satellite-tracking channels for fast acquisition and reacquisition.
‧ Superior sensitivity up to -159 dBm.
‧ Built-in WAAS/EGNOS Demodulator without any additional hardware. Or use the high-sensitive software to get the fast acquisition and reacquisition in the urban, canyon and foliage environments.

‧ Compatible with Bluetooth Serial Port Profile (SPP) completely.
‧ Low power consumption. Built-in rechargeable and changeable Lithium-ion battery, the working time can last 23 hours maximum.

‧ Provide expand terminal contact to other system without Bluetooth device.
‧ Support NMEA0183 V 3.01 data protocol
‧ 3 color-LEDs indicate to show the status of device.
‧ FLASH based program memory. New software revisions upgradeable through serial interface
‧ Small, sleek, and lightweight design easily fits in your hand.
‧ Over-Temperature protection
‧ Enhanced algorithms -SnapLock and SnapStart provide superior navigation, performance in urban, canyon and foliage environments.

‧ For Car navigation, Marine navigation, Fleet management, AVL, Personal navigation, Tracking System, and Mapping device application.

Basic Specification:
‧ Chipset：MTK MT3318 chipset.
‧ Channels： 32 parallel satellite-tracking channels.
‧ Frequency： 1575.42 MHz
‧ Receiver： L1, C/A code.
Acquisition Time (refer to MTK chip specification)
‧ Reacquisition： 0.1 second.
‧ Cold start： < 36 seconds.
‧ Warm start：< 33 seconds .
‧ Hot start： < 1 second
Receiver Accuracy
‧ Normal： < 3 meters CEP without SA.
‧ Enable EGNOS or WAAS：.
‧ Position：< 2.2 meters, horizontal 95% of time < 5 meters, Vertical 95% of time
‧ Velocity： within 0.1 meters / second
‧ Time： 0.1 microsecond synchronized GPS time
Use Limitation
‧ Altitude： < 18,000 meters (60,000 feet)
‧ Velocity: ：< 515 meters/ second (1000Knots)
‧ Acceleration： 4 G.
‧ Jerk： 20 meters / second3, max
Power Supply
‧ External Voltage: 5VDC +/-5%
‧ Batteries：
‧ Main Power: Built-in rechargeable Lithium-ion for system power.
‧ Backup Power: Rechargeable Lithium-ion battery for memory backup.
‧ Working voltage: 40~50mA (Normal mode).　 35mA (Power Saving).
‧ Auto Power Saving mode.
‧ Circuit protection on M-1000 when over-temperature condition - 50 occurs.
Output and Interface
‧ Output
‧ Output protocol
‧ Baud Rate： 38400 bps
‧ Data bit： 8
‧ Parity： No
‧ Stop bit： 1
‧ Format. NMEA0183 V3.01： GPGGA (1time/1 sec), GPGSA (1 time/5 sec.), GPGSV (1time /5 sec.), GPRMC (1time /1 sec.), GPVTG (1 time/1 sec), (GLL, or MTK NMEA Command for optional).

‧ Datum： WGS84.
‧ Input/ Output Interface:
‧ Compatible Bluetooth Serial Port Profile (SPP), Version1.2 and class 2(up to 10 meter range).

‧ In/Out Port. GPS signal (Out)/Command(In) with CMOS Level。Mini USB Type B Connector and Cable option：

‧ GR230-A2 (USB data cable)
Physical
‧ Size： 65 × 43 × 17.6 mm
‧ Weight： < 53 g
‧ Operating Temperature：-10 to + 60 (under the un-charging condition); Charging Temperature： 0 to + 45 ℃

‧ Storage Temperature：-20 to + 60 ℃
‧ Operating humidity： 5% to 95% No condensing
Other Functions
‧ Bluetooth frequency: 2.4 ~2.48GHz
‧ Bluetooth Input Sensitivity: -85dBm
‧ Low sensitivity of receiving satellite signal ： -159 dBm
‧ LED Functions： Indicate Bluetooth status, GPS status, Battery Status and Battery charging status